Fully Rigged and Motorized W Fishing Kayak From Alabama
The battery for the motor is located in the front, between the hull tips, in special wooden box I made. Randy.
Tag Archive: depth finder
DIY Transom Motor Mount and Pivoting Depth Finder for Fishing Kayak - Texas
Here’s more from Ray’s rigged fishing kayak -
A pivoting depth finder, and a DIY transom mount for his electric trolling motor that looks sturdy enough to take an outboard gas engine:
More from Ray’s rigged fishing kayak >
DIY High Tech Fishing Kayak
Russ, from Connecticut, purchased a W502 in the fall of 2011, and installed a 2hp 4-cycle Honda outboard on it (read his initial motorized fishing kayak review >> ). Then came winter, which in New England is pretty long even in clement years, and Russ turned his W502 into a high tech fishing system -
Russ needs both types of motors (electric and gas) since some lakes & ponds are for electric motors only.
Russ installed a fish finder, compass, a radio, and racks to hold the paddle and push pole. He also put another bolt in each side of the motor mount, to make it more stable and rigid.
Russ also installed a small seat from a rowing machine on top of the W saddle, as well as two electromechanical jiggers. -“It’s overkill, but it’s what I want to fish” he says…
Russ plots out the lakes before he fish them, marking the outline of the proper depth for his type of fishing with buoys on his GPS screen.
Cutting board used as platform - the batteries are in the kayak’s hull tips
Close up on batteries at the bottom of the hulls, for the trolling motor and jiggers. having a battery at the bottom of each hull acts as ballast, and stabilizes this fishing kayak.
Front deck, depth finder, platform with fishing tackle attached on both sides
Platform and mount for the electromechanical jiggers
Jiggers installed - rear view with electric motor, jointed tiller extension, and seat
Long shaft electric motor, transom mount with additional piece, and security cable
Rear view of Russ’ high tech fishing kayak. Note the motor shaft is secured with a bungee ‘W style’…
Russ’ high tech W fishing kayak. Note the eyelets on the hull sides are part of the 502 configuration, and that’s where you attach the XL flotation modules.